The Hellfire Match Self-Timing Muzzle Brake

Military Muzzle Brake "The Hellfire Match" with Self-Adjusting by Area419

Softer, flatter, without too much impact.

The Hellfire Match Self-Timing Muzzle Brake is a precision firearm accessory that provides minimal recoil and maximum control when shooting. The self-adjusting design allows for easy installation without special tools, making it ideal for tactical or sport shooters. Its effectiveness in reducing muzzle rise and controlling the weapon helps improve accuracy at long ranges.

Caliber Selection

To make it easy to choose, we offer four caliber options for the HELLFIRE brake. The difference in performance between using a brake bore for a specific caliber and the next size up is so minimal as to be almost non-existent, so we decided to simplify things to lower the overall cost for you, the consumer. As you can imagine, it would be impossible to provide exact quantities for six or more different calibers.

-223/6mm – Suitable for any caliber bullet up to and including 0.243 (6mm), e.g. 223, 5.56 NATO, 204, 17 gauge, etc.
-6.5mm – Fits any caliber bullet up to and including 0.264 (6.5mm), e.g. 257, (Magnums will fit)
-7mm/308 – Fits any caliber bullet up to and including 0.308, e.g. 7mm, 284, 270, (Magnums are fine)
-338 – Fits any caliber up to and including .338, such as 338WM, 338LM, 338NM, 338 Edge. See our Sidewinder muzzle brake for the best recoil reduction on these calibers.

The Hellfire Match Muzzle Brake - Self-Adjusting Muzzle Brake

Buy The Hellfire Match from the Solovey Store to improve your shooting.

Special Features:

• Very easy to install, the brake will NOT rotate when you tighten the locking collar. No more guessing where the brake ports will be when you tighten it!

• A simple round knurled nut that requires no tools to adjust the brake.

• The reset is excellent. This means that removing your brake and reinstalling it will not require a zero change.

• Adapters for mounting mufflers are available HERE

• Simply tighten the universal adapter onto the barrel with a 5/8" wrench, this part should never be removed. Next, thread the left-hand threaded brake/collar onto the adapter until it is almost snug. Now rotate the brake to a flat position, push the brake into the adapter and you will feel it lock onto the cone. Now fully tighten the collar by hand and you are done!

HELLFIRE brake caliper:

• Rear ports for maximum recoil reduction. Independently tested alongside the best muzzle brakes on the market. HELLFIRE showed 52% recoil reduction on a 6.5 Creedmoor test rifle. That’s ~4% more than one of the most popular muzzle brakes on the market.

• The proprietary port design controls muzzle rise without the use of top porting.

• The front of the brake lever has a caliber engraving

Order now to increase the control and accuracy of your shots!